This high quality set of OES frame
sliders fits the 2008-2009 Yamaha
R6. The frame sliders are made of
high impact strength Delrin and have
pressed-in 6061 aluminum inserts.
The left side uses a 6061 aluminum
offset bracket, so there are
NO
FAIRING MODIFICATIONS
REQUIRED
to install. Plus, the
bracket is black anodized for a great
look. The right side attaches directly
to the engine mount point on the
frame. 12.9 grade, high strength
mounting hardware is included with
the set.
 

More info on OES Frame Sliders
?
Shape
Color
$48.95
Installation Instructions
Our Delrin swingarm spools
for the 2008-2009 R6
feature deep grooves for
positive engagement with
your rear stand and extra
material on the ends to work
as sliders to help protect
your swingarm in a crash.
Stainless steel screws are
included with the set.
Color
$19.99
Click for large image
WOW! What a bargain! If you need
swingarm spools with your frame sliders,
take advantage of our great price for this
combo set. This set of 2008-2009 Yamaha
R6 no-cut frame sliders and swingarm
spools has unmatched, super-high quality
and an unheard of, super-low price. No
other manufacturer has an offer to compare!
?
Shape
Color
$63.95
All OES
products are
proudly made in
the USA!
If you need frame sliders, swingarm
spools, and bar ends for your
2008-2009 Yamaha R6, we have this
high quality set at a great price!
Shape
$74.99
Color
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
Our Delrin bar
ends are
slightly longer  
and absorb
impact better
than the steel
bar ends
which are  
originally on
the bike.
Color
$15.00
If you damage a frame slider in a crash or by
dropping the bike, you can replace just the
side you need without purchasing the entire
set. Please make a selection in the fields
below. Side is as viewed by sitting on the
bike, so left is clutch lever side, and right is
throttle side.
The left side for the 08-09 R6
uses an offset bracket- the $19.00 slider is
without the bracket, since the bracket does
not always get damaged. The right side
slider and bracket combo is available below
for $29.00
Shape
Side
Color
$19.00
Replacement Frame Sliders
__________________________________________________________________________________________________________________________
Left side slider and
bracket assembly
for 08-09 R6.
Includes mounting
hardware.
Shape
Color
$29.00
_______________________________________________________________________________________________________________________
These items are worth their weight in gold! If it takes
you several minutes of fumbling around before the
rear wheel is installed on your 06-09 R6-R, these
tools will put an end to all your troubles!

The smaller part in the left side of the picture presses
into the hollow, threaded end of the rear axle to act as
a guide for the axle as it is being inserted through the
swingarm and wheel. We've been using this item for
years on our race bikes to make wheel installation a
snap.

The larger part on the right holds the rear brake
caliper in place while the wheel and axle are being
installed. Simply install the rear brake caliper, insert
the installation tool into the swingarm and through  
the caliper, install the wheel and chain, then insert the
axle. The pointed end of the axle will easily find its
mark and push the installation tool out of place. Put
the axle washer and nut on and you've just completed
a wheel installation easier than ever before!
$24.99
06-09 R6-R Rear Wheel Installation Kit
Instructions